|
Perkins
Sabre Auxiliary Engines |
 |
| |
|
| |
|
| |
|
Perkins Sabre Auxiliary engines are constant speed engines ideally suited for use in onboard gensets or to drive hydraulic powerpacks or water
pumps.
|
| |
|
| |
| Perkins
Sabre 700 GM |
|
| |
From the Perkins Sabre partnership, and based on the naturally aspirated 3.0 litre 4 cylinder, direct injection diesel engine we introduce the Perkins Sabre 700GM.
Environmentally friendly based from the US EPA Tier 1 off highway product
Premium engine features for reliability and durability minimises engine downtime and service costs.
|
| |
|
| |
|
|
Number of cylinders 4
Cylinder arrangement Vertical in-line
Induction system Naturally aspirated
Combustion system Direct injection
Cooling system Fresh water heat exchanger or adapted for keel cooling
Displacement 3.0 litres (183 cu. in. )
Bore and stroke 97.0 mm (3.82) in x 100.0 mm (3.94 in)
Compression ratio 17.5: 1
Direction of rotation Clockwise viewed from front
Firing order 1-3-4-2
Total weight (wet) 282 kg (622 lbs)
ECONOMIC POWER
One side servicing for reduced service time and cost
Extended service intervals, including and extending oil change period of up to 500 hours (or 12 months) coupled with competitively priced parts providing low cost of ownership
Electronic governor gives close control and means that the rated speed can be set at site to either 1500rpm or 1800rpm allowing standard builds to operate at either 50Hz or 60Hz
RELIABLE POWER
Suitable for operation in ambient temperatures up to 52° C and
sea waters up to 39° C
Over 4,000 distributors and dealers offering full parts and
service worldwide
Fuelled starting aid for temperatures down to -15°C
(5°F)
|
|
| |
|
| |
| Perkins
Sabre 4 GM |
|
| |
|
The Perkins Sabre 4GM is a turbocharged, 4 cylinder, 4 litre engine. Its premium design features provide economic and durable operation offering the ideal characteristics for electrical power generation.
|
| |
|
| |
|
|
ECONOMIC POWER
One side servicing and translucent header tank for reduced service time and cost
Unique Quadram combustion system enables high output with lower fuel consumption and noise
Extended service intervals, including 400 hour (or 12 months) oil change period, and competitively priced parts provide low cost of ownership
DURABLE POWER
Maximum cooling efficiency is provided by a gear driven water pump
Leak free operation is ensured by special crankshaft seals and sophisticated controlled swell joints
RELIABLE POWER
Suitable for operation in ambient temperatures up to 50° C and sea waters up to 38° C
Fuelled starting aid for temperatures down to -20°C
Over 4,000 distributors in 160 countries offer full parts and service support
Approved by classification societies and marine authorities
|
|
| |
|
| |
| Perkins
Sabre 4TGM |
|
| |
|
The Perkins Sabre 4TGM is a turbocharged, 4 cylinder, 4 litre
engine. Its premium design features provide economic and durable operation offering the ideal characteristics for electrical power generation.
|
| |
|
| |
|
|
Reliable power
Suitable for operation in ambient temperatures up to 50°C and sea waters up to 38°C
Fuelled starting aid for temperatures down to -20°C
Over 4,000 distributors in 160 countries offer full parts and service support
Approved by classification societies and marine authorities
Number of cylinders 4
Cylinder arrangement Vertical in-line
Cycle 4-stroke
Induction system Turbocharged
Combustion system Direct injection
Cooling system Fresh water heat exchanger or adapted for keel cooling
Displacement 3.99 litres (243 cu. in. )Bore and stroke 100.0 mm (3.937in) x 127.0 mm (5.0 in)
Compression ratio 16.0: 1
Direction of rotation Clockwise viewed from front
Firing order 1, 3, 4, 2
Total lubrication oil system capacity 8.1 litres (l.78 UK gal)
Coolant capacity (heat exchanger cooled) l8 litres (3.96 UK gal)
Total weight (dry) 434.6 kg (958 lbs)
Total weight (wet) 455.0 kg ( l003 lbs) |
|
| |
|
| |
| Perkins
Sabre 6TG2AM |
|
| |
|
From the Perkins Sabre partnership, and based on the Perkins universally acclaimed 1000
Series, a 6 cylinder turbocharged diesel
engine
|
| |
|
| |
|
|
Economic power
One side servicing and translucent header tank for reduced service time and cost
Unique Quadram combustion system enables high output with lower fuel consumption and noise
Extended service intervals, including 400 hour (or 12 months) oil change
period, and competitively priced parts provide low cost of ownership
Number of cylinders 6
Cylinder arrangement Vertical in-line
Cycle 4-stroke
Induction system Turbocharged
Combustion system Direct injection
Cooling system Fresh water heat exchanger or adapted for keel cooling
Displacement 5.99 litres (365 cu.in. )
Bore and stroke 100.0 mm (3.937 in) x 127.0mm (5.0 in)
Compression ratio 16.0: 1
Direction of rotation Clockwise viewed from front
Firing order 1-5-3-6-2-4
Total lubrication oil system capacity 18 litres (3.96 UK gal)
Coolant capacity (heat exchanger cooled) 24 litres (5.28 UK gal)
Total weight (dry) 579 kg (1276 lbs)
Total weight (wet) 626 kg ( l380 lbs)
|
|
| |
|
| |
| Perkins
Sabre 6TWGM |
|
| |
|
The Perkins Sabre 6TWGM is a turbocharged, charge air-cooled, six
cylinder, six litre engine, one of a family of engines ranging from 39.5 to 161
kWm.
|
| |
|
| |
|
|
Economic power
One side servicing and translucent header tank for reduced service time and cost
Unique Fastram combustion system enables high output with lower fuel consumption and noise
Extended service intervals, including 250 hour (or 12 months) oil change
period, and competitively priced parts provide low cost of ownership
Electronic governor gives close control and means that the rated speed can be set at site to either 1500rpm or 1800rpm allowing standard builds to operate at either 50Hz or 60Hz
Number of cylinders 6
Cylinder arrangement Vertical in-line
Cycle 4-stroke
Induction system Turbocharged
Combustion system Direct injection
Cooling system Fresh water heat exchanger or adapted for keel cooling
Displacement 5.99 litres (365 cu. in. )
Bore and stroke 100.0 mm (3.937) in x 127.0 mm (5.0 in)
Compression ratio 17.0: 1
Direction of rotation Clockwise viewed from front
Firing order 1-5-3-6-2-4
Total lubrication oil system capacity 16 litres (3.52 UK gal)
Coolant capacity (heat exchanger cooled) 25.3 litres (5.57 UK gal)
Total weight (wet) 659 kg ( 1453 lbs)
|
|
send us an email
send us a fax 
call us